Hacker news

  • Top
  • New
  • Past
  • Ask
  • Show
  • Jobs

Show HN: My $300 embroidery machine needed a subscription, so I built my own app (https://github.com)

743 points by simpsoka 8 days ago | 258 comments | View on ycombinator

spdustin 8 days ago |

I'm going to assume Claude did the heavy lifting here (because it's Q4 2026 and the odds are in my favor), so if I'm right: this is one of the best examples of the way LLMs can empower users to not only scratch all the itches, but demonstrate to anyone who stumbles by just how satisfying it can be to do so themselves.

Your app represents a future that I, an old, actually love. When I see projects like this, I don't think about ongoing support or if the project will be abandoned. I think, "Woah, I hadn't thought of that. Now I'm going to try it. Because why wouldn't I try to get all the value I can out of my $20/month Claude subscription?"

Even though I've been a developer for 30+ years (and a nerd for longer), I've never felt so motivated by the potential of a technology to make an individual's life richer. Thanks for sharing it.

And if you wrote it by hand, my hat's off to you for sharing that, too.

skeedle 7 days ago |

I also recently entered into the world of embroidery software (disclaimer: I programmed embroiderybreeze.com). I can best describe it as these poor embroiderists have been held hostage by Big Embroidery for years. The software out there is old, and super expensive. My wife has embroidered a lot and got frustrated trying to digitize just some simple designs and asked if I could make software for her. When I looked at the multiple applications she used and the difficulty of it I was shocked. It was like 1998 level. Then I looked at the prices and I was shocked even more. So I started making software for her.

Now I will say there is more to embroidery than one might first expect. It's got some overlap with image editing but only to a point. The stitching really matters and to make it stitch out well requires sort of a lot of rules about how to do that. Most software is either $1000+ and requires you take a course, or there's a subscription but you're really just downloading designs and sending them to your machine. There's a fairly healthy market of people selling embroidery designs on Etsy in part I believe because digitizing for embroidery is not that easy and requires expensive software. So people often just buy designs rather than make them themselves.

To make things worse, basically no embroidery digitizing software was available on Android or iOS and it usually was just Windows. So I set out to build the easiest digitizing software which would also work on mobile devices which means you have to design around things like no key combos, no right click, etc. So while I expected it wouldn't be that hard to write embroidery digitizing software, I learned that just being able to send a PES/DST/etc file to a machine was really not the hard part. So kudos to the OP writing his own software. Gotta break that grip of Big Embroidery.

gregsadetsky 7 days ago |

This is very very much in my current wheelhouse. My (extremely genius) friend Owen Trueblood reverse engineered the Brother PE-150 [0] and made a replacement motherboard, replacing the stock one, to control it over USB.

The PE-150 is a great example of the absurdity/sadness of the embroidery world: today, you can have those machines for $100 on eBay, completely functional, but being sold/abandoned because they use a proprietary cartridge holding proprietary data that no one wants to deal with.

Even novel Brother machines that have USB connectors still force you to use terrible apps and lock you into subscriptions. This entire world - which is/should be full of twee and about making beautiful things with your hands - is somehow corrupted with this merchandising/everything-software-should-have-a-price mentality which is just so sad.

Nothing to announce announce, but I 100000000000000000000000000000000000% want to make embroidery machines more accessible, open, and free of this balagan.

A few more links on this topic:

- https://github.com/CreativeInquiry/PEmbroider !! Check the "Motivation" section of the readme!

- https://emberdesign.net/ - a startup by another friend, with a really great online editor, and which exports a variety of formats

[0] https://owentrueblood.com/blog/2024/12/10/reverse-engineerin...

TrackerFF 8 days ago |

If there's one thing I'm very optimistic about with AI, it's the de-bricking of bricked things, giving new life to legacy/unsupported software and hardware, or just getting around shitty practices like this.

Seems very promising. I have a home recording studio, and there's a small revolution going on with people cloning subscription-based stuff. Some brands are notorious for making expensive equipment which they just stop supporting after 10 years, sometimes rendering them obsolete. Or tacking ridiculous licensing mechanism onto the equipment.

rocmcd 8 days ago |

For anyone interested in this space, I'd also recommend looking at InkStitch[0], which is a plugin for InkScape. It allows you to take SVGs and export them into file types that an embroidery machine can use. It's not without its faults (there is a surprising amount of care needed for any design - stitch placement, size, type, layering, etc), but it's been a fun experience to take an SVG and turn it into something real.

[0] https://inkstitch.org/

geerlingguy 8 days ago |

William Osman built a browser app that works pretty well too: https://www.stitchslop.com/

I think that one was built with Claude (he wanted to embroider cats on merch, and didn't like the expensive subscription software's ancient UX).

robinduckett 7 days ago |

My mum passed away but she was constantly embroidering on these machines and always complained about the Brother software costing a bunch of money and not working on the later versions of Windows. We managed to find alternative software so she could use the software using Windows 7. It’s nice to see PES support and hopefully the lifetime of these machines can be expanded for a long time because they rarely breakdown if maintained correctly.

inanutshellus 8 days ago |

What's next? My printer allowing me to use my own ink? OMG? It's the Wild West again, man.

tomas1808 7 days ago |

I did a similar thing today. I bought a used enterprise card printer that expected me to pay for some proprietary program to design and print. Astra created the program in 20min, worked first try. Even customized it for my very specific use case. I don't even consider uploading it to GitHub because why do it if anyone can just ask their LLM of choice and get it a few minutes later? These types of programs are now literally worth nothing.

nijave 8 days ago |

Love this type of stuff but afraid it won't last. Only a matter of time before OEMs ask same LLM to setup secure boot with signed firmware with anti-rollback and pinned certs.

There is already prior art like anything Google (phones, Fitbit)

curtisblaine 8 days ago |

We should kill subscription models with LLMs app by app (and possibly server by server) until hardware is sold as standalone hardware with no strings attached. I don't care if this slows down r&d or makes printers more expensive. Hardware vendors have abused the subscription model to a point that they can't be trusted with it.

amelius 8 days ago |

I'm tired of everything needing a subscription.

Life was better before the internet which allowed companies to remotely put their hands in our pockets.

lanewinfield 8 days ago |

Super cool, but I wish you said both what your $300 machine is and also what machines this is compatible with somewhere very clear.

brainless 7 days ago |

This is the reason I am hopeful with LLMs. Yes there are massive risks but I do not think the average person has ever been empowered by tech in quite this way. An LLM agent can write automation for much of home/farm/business hardware.

I live in a farm. I am software engineer and gave up city life few years ago. Now, all I dream of is automating little things in my chicken farm and growing the business. Not in the mechanical monstrous way that makes me hate eating meat. But a balance in between with actual daily physical work and care. And tiny little automation ideas. Measure food intake, an automatic weight check, door closer/opener, heating control... so many things. And I do not want to buy the best "Chicken Star 3000" model, I want to make these out of microcontrollers with tiny mechanical parts that I can assemble. AI helping me all the way.

I also have a small sewing machine. I want to get a larger one. I want to make "patch" clothes, jackets. I love them. From scrap clothes, etc. What a time to tinker!

egeozcan 7 days ago |

William Osman (a youtuber) had created one too! See: https://www.reddit.com/r/Machine_Embroidery/comments/1wurw5o...

Gys 8 days ago |

The readme does not specify which brand(s) or machine(s) are supported? It only mentions BT for communication? Is there then a kind of standard protoc?

thedellmonitor 8 days ago |

I'll have to give this a try. Back when I was trying to do embroidery with my $300 machine, I found that Hatch was the only software that would consistently give me good results. The only problem was that Hatch (at the time) was over $1,000 USD. I am a hobbyist, I refuse to pay that much for a hobby I hardly engage with. The saving grace there was that Hatch had a 30 day free trial, which I could continue to renew with a different email.

About a year into doing this, they patched it so the license server would save your HWID and would not run in a VM anymore. I decided to just give up on the hobby right there.

Maybe this will finally get me to pull the machine out of the garage and get back into it!

sakopov 7 days ago |

Embroidery has a lot of hobbyists who pay absolutely ridiculous money for digitizing software. It is in dire need of cheap and easy solutions. I worked on this problem about 10 years ago with a friend. We built out fairly sophisticated digitization library for a good amount of embroidery formats. We ended up booking a booth at an embroidery roadshow to show our work and unfortunately things fizzled out before we got there. Good to see this niche getting disrupted.

oorestisime 7 days ago |

This looks awesome congrats! I recently found a local shop in Cyprus making custom embroidery tshirts and ordered a few ones! I didnt know it could be possible to even make on my own!!!

btw unrelated, i ll add your replacement story in https://replacemrr.com/ as its the kind of stories i am looking for!

patrickbrouwer 7 days ago |

I was literally shocked to see the prices of embroidery software. And not to mention the user interfaces, like they are stuck in the 90s!

I’ve been using InkStitch, but learning vector graphics for non-technical people is not user friendly. An upcoming app that is quite promising is StitchPencil, developer by a German engineer. Looks solid!

Btw I believe nowadays you can easily let Claude build you software that replaces the subscription entirely.

paulschreiber 8 days ago |

This is great! Would love to see something like this for Cricut.

jlyon1 7 days ago |

I ran into the same problem and made something similar, but I ended up writing what is basically a server that can be driven by any thin client. The goal being I can start designs by either a simple prompt, or create a mobile/tablet client that has the same power as desktop applications.

In addition to the digitizer, I am building my own set of heuristics that give designs a "better" outcome but things are really a work in progress right now.

Embroidery is a really fun hobby for me so i'm basically optimizing for "what I need" as I learn more about it!

https://studio.embroiderytext.com/

newhotelowner 7 days ago |

We have a proprietary rfid encoder with their software to make hotel room keys (BeLine Locks). It's bulky, and doesn't connect to PMS. Doesn't have any API. We learned how it works, and build our own little encoder software that provides API to make keys. Created a webapp that uses new API. Now, we can make keys from PMS. It may not save much time, but keys will be more accurate based on the reservation. And will be able to track who screwed up.

Another hotel uses different vendor locks with a different encoder. They don't also provide APIs or way to integrate. I just order a new encoder for that. Hopefully, we can figure that out too.

mmmlinux 8 days ago |

Interesting, Youtuber William Osman is also working on something similar, but for full size industrial machines. I'm not sure if its public released yet though.

Also don't forget Linus him self wrote one of the embroidery machine drivers for Linux.

hecturchi 7 days ago |

I have started doing the same. For a few cents on Deepseek you get full reverse engineering of apps, firmware, can patch whatever and essentially build anything that works for yourself. Leftovers can be done with local LLMs for free.

Many apps/products can be freed and owners can take ownership of what's theirs. It doesn't even need to be a community effort as you can make something fully tailored. It also frees you from gated app stores as distribution channels, and all the unnecessary tracking.

It will take years for many nasty apps/companies to catch up, so nerds should enjoy this new superpower.

wildpeaks 7 days ago |

I actually went on a deep dive when I encountered this project a few weeks ago.

It seems a lot of the magic comes from Respira (https://github.com/jhbruhn/respira), there were already open source softwares to avoid using the subscription app.

Also the $300 price was probably secondhand/on sale because that machine is usually 499, not 300.

Still a cool project, but you'd think this was reverse engineered from scratch from the description whereas this is more like a downloader wrapping yt-dlp

susiecambria 3 days ago |

As a quilter and admirer of the wicked cool machine and hand embroidery designs coming out of the anti-patriarchy movement in particular, I am thrilled to see this Show HN!!

xtiansimon 7 days ago |

This the sort of product hacking that Cory Doctorow discusses:

“…all they have to say is there was a countermeasure. The toolmaker bypasses the countermeasure. And then that’s a felony…”

https://youtu.be/LbidZVPciys?t=1842&is=dOoFAjVunKa01SIq

https://youtube.com/shorts/Gzwe6DuIoQM

wittjeff 7 days ago |

I have theorized for a couple of years that an embroidery machine might make a cheap tactile graphics device for blind people. This might make it a lot more feasible. Thanks!

undefined 7 days ago |

undefined

ssgodderidge 8 days ago |

Love to see it OP! I would love to try this out.

I'm curious, how do you make sure that the embroidery files are valid of the file type (.exp) for example, and that B) things aren't done in such a way that cause the needle to break, stiches to overlap too much, etc etc that would otherwise harm a machine that reads the file?

sheepscreek 7 days ago |

I have a $1,000+ Posha cooking robot that requires a monthly subscription, which is easily the most annoying thing about it. I’ve been thinking about doing this exact same thing. Nice work, and thanks for the reminder to finally get on it!

jLaForest 8 days ago |

very cool, thanks for sharing.

what machine would you recommend to someone looking to get into this as a hobby?

asibahi 7 days ago |

What’s a decent beginner friendly embroidery machine I can use with this software? I understand most people come at this from the other end but I’d like to buy a machine as a gift and I have no idea what to look for

chews 7 days ago |

I love this, this is the sort of work we want LLMs to do. Sewing machines are the physical manifestation of computing, weaving inspired punchcard creation and it's nice to see it come full circle. A smart stitch in time saves nine.

plussed_reader 7 days ago |

Is it thought that LLM providers will get blanket legislation for IP infringement or will parties have to pursue individual enablers?

Judging by Nintendo's recent action it seems like a new game of whack a mole currently...

imranjavaid 6 days ago |

Love this. Hardware you already paid for asking for a monthly fee feels wrong. Did the machine's file format take much reverse-engineering, or was it documented anywhere?

mosselman 7 days ago |

I did not know you could get an embroidery machine for $300!! This seems very cool. T-shirts with an embroidered logo always look so much nicer than any others. I could see myself getting into this.

edarchis 7 days ago |

Even though I'm dubious of the long term support of this kind of software, it made me consider getting one such machine. This makes getting one quite a decent investment.

bill10 7 days ago |

With cheaper and better AI, I guess personal software will have less and less market since everyone can just build their own. However, business side might still have a chance

Ccecil 8 days ago |

Years ago I ran across another project doing similar. Embroidermodder.

https://www.libembroidery.org/

Always room for another though.

ergojoe 8 days ago |

We're going to see more of this. Like the guy that made the custom Mac print driver. Most companies put zero effort into making sure things like this aren't homebrew hackable.

coolsank 7 days ago |

i've been having fun doing these sort of fun apps as well. did something similar where i had a peloton bike but didnt want to pay $50/month sub. got codex to write a launcher and app that just plays youtube videos , which is pretty all i needed. sharing here if anyone else has an old bike lying around :)

https://github.com/sanjaykmenon/BikeTube

ligarota 7 days ago |

Initial commit of 86,000 lines. Yes we know what you did

joquarky 7 days ago |

Probably an unpopular take, but this is why copyleft and agentic coding should be considered aligned in principle. Both can subvert closed source lock in.

athst 8 days ago |

This is a really cool use case for AI coding. Well done

chris715 7 days ago |

Curious what the agent actually sees though. Does it get a rendered preview of the stitches, or only the SVG geometry ?

vineetsriram 7 days ago |

This is a perfect example. I think the subscription era is going to end as software becomes bespoke.

sevenseacat 7 days ago |

Can someone make a non-shitty version of Cricut Design Space next?

onemoresoop 8 days ago |

What’s the Embroidery machine name and model this was built for?

simonjgreen 7 days ago |

I wonder if anyone has done this to the Cricut machines yet

inatreecrown2 7 days ago |

Should really have used Zig instead of Rust.

MiroslavPokorny 7 days ago |

Thanx for sharing, followed and starred

whatever1 8 days ago |

I want this but for printer firmware

Skyfall106 7 days ago |

This is really cool! Good stuff

wferrell 7 days ago |

Kath! What a lovely app.

hypfer 7 days ago |

Well, you did build part of it (and, technically, claude did that), but the groundwork was the existing respira by someone else.

So.. eh.

I mean it's cool and all, and at least claude did do proper attribution in the code, but your post kinda does not and neither does the readme.

That's not exactly in spirit of FOSS.

https://github.com/jhbruhn/respira

xlayn 7 days ago |

This is one of the best things about LLMs... but I suspect one of the first ones that will be axed too at some point.

Because in a sense it's anti-shitifction... it allows you to extend the lifespan of some thing... repurpose others..

Try to root some old phone and any big house model will refuse...

Ask Qwen to decompile an app... and once decompiled claude has no issues continuing work.

newhotelowner 7 days ago |

Which machine?

asdfman123 7 days ago |

You missed a good opportunity to name your software Sister as a play on Brother

joshu 8 days ago |

The supplied software is truly terrible.

cyai 6 days ago |

[flagged]

kevin8023 7 days ago |

[flagged]

liuqianyu885 6 days ago |

[flagged]

Archit 6 days ago |

[flagged]

alorenzom 7 days ago |

[dead]

danielearcuri 7 days ago |

[flagged]

pantryscale 8 days ago |

[flagged]

mikevannelli 7 days ago |

[flagged]

yoy0721 7 days ago |

[flagged]

undefined 7 days ago |

undefined

enoch_hou 7 days ago |

[flagged]

th0ma5 8 days ago |

[dead]

tintor 8 days ago |

[flagged]