Hacker news

  • Top
  • New
  • Past
  • Ask
  • Show
  • Jobs

Chasing an audio artifact on power loss (https://subalpinecircuits.com)

67 points by ireflect 7 days ago | 11 comments | View on ycombinator

olelele 5 days ago |

Hey cool device!

Seems like it sounds good to, from the demo video.

In hifi amps from 1980-94 or so they implement speaker protection with relays that switch out the speakers before the thump of turning on or off the psu.

PowerElectronix 5 days ago |

I would still use mlcc for the bulk capacitance. Use 12V or 25V ones to not have to worry about voltage bias. You can get quite a lot of capacitance in 0805 these days.

bob1029 4 days ago |

Maintaining a stable DC rail for a brief period of time upon power loss is generally a good idea. As long as the device doesn't remain energized longer than it would take someone to disassemble.

Electrolytic capacitors are the best solution to this problem from an energy density perspective, but they can wear out faster than ceramics.

BizarroLand 3 days ago |

I wonder if adding a cap to the power in for the system would slow the power off long enough for the mute to kick in?

nubinetwork 4 days ago |

> Fast forward many months after I actually got around to finishing the next revision of the boards, got them back - everything worked except the voltage spike! It was still there! What!

If nothing drains that capacitor, it'll charge up after a few on/off cycles and never buffer the spike again... (until it randomly drains by itself 6 months from now)

fnord77 5 days ago |

I was confused what an SA-01 was and I googled and it came up Casio SA-01 keyboard. But that's apparently unrelated to this project

undefined 5 days ago |

undefined

ErroneousBosh 5 days ago |

TL;DR vibecoder discovers power supply decoupling and fails to reinvent muting circuits.